INTERCON The Cleaner...The Better

Products

Products

inter-seal


Product Code 364

This product is an extremely durable acrylic polymer seal that offers state-of-the-art performance when used for concrete, stone, marble, ceramic, tile and other non-resilient flooring. It gives equally superb results on old, new, rough, porous or smooth substrates. This sealer has a non-solvent base, is safe and easy to use, easy to clean up and has a faster drying time than many solvent-type products. Highly recommended for all surfaces appropriate for water based maintenance. Provides excellent gloss, low color and high clarity. Will not strip using ordinary floor strippers.

55 Gallon, 5 Gallon, 4 x 1 Gallon


Gallon

5 Gallon

COLOR (LIQUID): Milky White
ODOR (DRIED): Clear Colorless
ODOR: Mild
pH: 8-9
FLASH POINT: None
SPECIFIC GRAVITY: 1.03
NON VOLATILE SOLIDS: 18%
LEVELING: Excellent
COVERAGE: AVG. 2000 sq. ft./gal.

Thoroughly sweep and clean floor with a suitable detergent and rinse before application to prevent embalming dirt and stains and to insure proper coating and wear properties. No etching or neutralizing is necessary. Apply seal with a clean applicator, roller, quality string mop or sprayer generously, without puddling, to insure adequate protection and easy maintenance. For best results, apply two to three coats, allowing seal to dry between coats (about 30 minutes depending on ventilation, humidity, temperature and porosity).Top coats of wax or finish may be applied if desired. Allow an overnight cure before resuming heavy traffic.
NOTE: This seal is very difficult to remove when dried. Do not apply or splash onto unintended areas.

General Downloads