COVID-19 Information and Tips
INTERCON The Cleaner...The Better

Products

Products

RTG READY TO GO TB Disinfectant Cleaner


Product Code RTBD

The RTG READY TO GO TB Disinfectant Cleaner Eliminates bacteria and viruses in 5-minute contact time.* Formulated without the harmful, irritating effects of other chemical disinfectants. This product provides disinfection strong enough to kill TB and is certified by the EPA’s Design for the Environment program.

KILLS 99.99% OF GERMS: Broad spectrum, hospital grade disinfectant - Tuberculocidal – Fungicidal - Virucidal* - Sanitizer. Effective against a broad range of disease causing organisms with fast kill times.
TOUGH ON GERMS, GENTLE ON SURFACES: Suitable for use on hard and/or soft surfaces. Dries clear on mirrors and glass leaving no haze and streak free. No rinsing or wiping is required.
BOTANICAL ACTIVE INGREDIENT - CITRIC ACID: EPA Category IV (lowest level of toxicity) requiring no precautionary statements or PPE - will not irritate skin, eyes or lungs. Free from harsh and abrasive chemicals. Non-corrosive . No Rinse required even on children’s toys.
CLEAN & DISINFECT IN ONE STEP: 5-minute contact time for disinfection; 1-minute contact time for sanitization. Enables one-step cleaning and disinfection - no post- rinsing required.

*refer to label

12x32 oz. with 6 triggers

4x1 Gallon Case

COLOR: Colorless

ODOR: Light Citrus

PH RANGE: 2-2.3

DILUTION: RTU

DENSITY: 8.41

SOULUBILITY IN WATER: Complete

ACTIVE INGREDIENT: Citiric Acid

DIRECTIONS FOR USE: Please read all directions carefully before using this product. It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Preclean areas with visible soil prior to disinfection.
DECONTAMINATION OF CRITICAL OR SEMI-CRITICAL DEVICES PRIOR TO TERMINAL STERILIZATION/HIGH LEVEL DISINFECTION: This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that [1] is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or, [2] contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
*THIS PRODUCT KILLS HIV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in all settings in which there is an expected likelihood of soiling of hard, non-porous surfaces/objects with blood or body fluids and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of human immunodeficiency virus Type 1 HIV-1.
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATING SURFACES/OBJECTS SOILED WITH BLOOD AND BODY FLUIDS WHICH MAY CONTAIN HIV-1 [AIDS virus]. PERSONAL PROTECTION: When handling objects soiled with blood or body fluids use disposable latex gloves, gowns, mask and eye coverings.
CLEANING PROCEDURE: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of the disinfectant.
CONTACT TIME: Do Not Dilute. Precleaned surfaces must remain visibly wet for five minutes using mop, cloth or sponge to mitigate HIV-1 virus. Use a 5 minute contact time to kill all bacteria, viruses* and fungi listed on the label.
DISPOSAL OF INFECTIOUS MATERIAL: Blood and other fluids should be autoclaved and disposed of according to Federal, State and Local regulations for infectious waste disposal.
*Viruses
1on hard, non-porous surfaces
2when used according to disinfection directions

See product label for complete directions for use.